Boat Paint - You won't need it with Seapen's advanced boat lift & floating dock system.

Our boat lift system will save you a fortune in boat paint by keeping your boat 100% dry without having to lift it out of the water. Never Antifoul again.

Our floating boat lift saves you spending money on antifouling and boat paint!

The Sea Pen is the most advanced floating dock system available, docking your boat at water level yet keeping it completely dry and cutting back the need for constant boat painting. With your vessel moored in a Sea Pen you will never need to antifoul your boat again. There’s a range of sea pens available for almost every berthing configuration and boat. We can accommodate vessels from 6 meters to 30 meters in length.

The Sea Pen docking system is remotely controlled allowing you to sink the encloser, drive or back your boat in then have it float up around the hull. SeaPen protects your boat by forming a skin against the hull of your boat allowing the water to drain away as it rises up around the hull. Our patented design uses netting inside the skin that the sea water can run down inside the fabric skin effectively drying the sides of the hull and stopping fouling. This means that you never need arrange antifouling or boat paint again!

The Sea Pen consists of a solid HDPE frame that we pump air in and out of to allow it float or sink so that you can get you boat in and out of the pen. To enter the Sea Pen the frame of the unit sinks under the surface allowing the pen to fill with water. All of the rope matt and skin of the pen falls away, well clear of the running gear of the boat, so you can drive all of the way into your berth.

With the boat secured, we then pump air into the frame of the pen so that it floats up around the boat. The outside skin of the pen prevents any water getting in, creating an isolated pool of water that the boat is floating in. The water pump located inside the pen then pumps all of the water out. As the water is pumped out, the skin and internal rope mat slowly shrink-wrap around the hull and running gear of the boat. The internal woven rope mat is crucial to the boat being dry. It creates a barrier between the hull of the boat and the outside skin of the pen allowing water to drain down into the centre bilge cavity of the pen and creating an air pocket that the boat is floating on.

Your boat is now completely dry ....floating on a layer of air protecting your boats paint.

There’s range of sea pens available for almost every berthing configuration you have The Sea Pen will support all types of drives, from stern drives, to jet drives, outboards, surface drives and even IPS pod drives. Supporting a range of hull configurations from mono and multi-hulls to even keeled boats. In general, if it floats, we can keep it dry and save you money and time on boat paint.